|
| |
| » Converter (E1 to V.35) |
| |
| Single V35 Port E1 CSU/DSU |
| |
 |
|
The ETU01-Plus stand-alone DSU/CSU is a digital access unit for Unframed E1 or Fractional E1 service. The ETU01-Plus data channel supports user-selectable transmission rates via randomly selected E1 timeslots, which provides integral multiples of 64kbps, up to a maximum 2.048Mbps (unframed), for a line attenuation of up to 43 dB on twisted pair or coax cable.
--------------------------------------------------------------------------------------
|
|
| |
|
| |
| Single Port Unframed E1 CSU/DSU |
| |
 |
|
The G703E1U stand-alone DSU/CSU is a compact, digital access unit for Unframed E1 service termination. The G703E1U data channel supports 2.048Mbps, for a line attenuation of up to 43 dB on twisted pair or coax cable.
--------------------------------------------------------------------------------------
|
|
| |
 |
| |
| ETU/TTU-E1/ T1 Interface Module |
| |
 |
|
When purchasing one of our single or multi-port access units or multiplexers that support user replaceable interface modules, our ETU/TTU interface modules provide easily selectable electrical interfaces for a wide selection of user applications. In addition to standard datacom interfaces such as V.35, RS-530, X.21, RS-449, etc. Ethernet modules are also available for bridging or routing of Ethernet over E1 or T1
-------------------------------------------------------------------------------------- |
|
| |
|
| |
| » ERM SOLUTION: Interface Converter,Media Converter,Cross Connect. |
| |
| 4U 12 slot E1/T1 Cross Rate Converter Rack |
| |
 |
|
The ETRM01 is a 4U 19(23)" concentrator rack for E1 and T1 Cross Rate Converters in central office installations. There are 13 slots available for hot swappable FTEC cards. An optional SNMP card can be installed into the last slot for configuration and management, leaving 12 slots available for FTEC cards
--------------------------------------------------------------------------------------
|
|
| |
|
| |
| 4U, 10 I/O Slot Data, Ethernet, Voice E1 Managed Multiplexer |
| |
 |
|
The ERM-Mux/plus is a 4U 19(23)" 14 slot rack type E1 Time Division Multiplexer for Fractional E1 network access which is designed for non-stop operation.There are 10 slots available for hot-swappable ERM-Mux/plus-I/O cards.
--------------------------------------------------------------------------------------
|
|
| |
|
| |
| 2U, 20-Slot, E1 Inverse MUX Concentrator |
| |
 |
|
The ERM04A is a 2U high 19" Rack, 20 slot modular media converter rack. It provides an economic solution in high density
--------------------------------------------------------------------------------------
|
|
| |
|
| |
 |
|
The ERM-DXC is a 4U 19(23)" 11-slot rack type E1 Digital Cross Connect for Fractional E1 network access which is nested in a concentrator and provides an economic solution for central site users.
--------------------------------------------------------------------------------------
|
|
| |
| |
| • PDH Converter |
|
| |
| CTC has specialization in manufacturing variety of interface converter as per the customer requirement. |
| |
| RS 232 to V.35 , RS 485 etc. |
| |
| V.35 Interface Converter |
| |
 |
|
The V35IP family of interface converters allows full bi-directional synchronous conversion between V.35 and X.21 or RS-449/530 hardware. These converters all work WITHOUT an EXTERNAL POWER SUPPLY. The V35IP interface converters are designed for synchronous V.35 operation at data rates up to and including 2048kbps.
--------------------------------------------------------------------------------------
|
|
| |
|
| |
| V35 to RS485 Interface Converters |
| |
 |
|
The V35/485-1 Interface Converter provides conversion between V.35 and RS-485 standard interfaces. The V.35 interface connection is via a supplied adapter cable and the unit's DB-25 female connector, while the RS-485 side's connection is via a five screw terminal block.
--------------------------------------------------------------------------------------
|
|
| |
|
| |
| » Ethernet Bridge |
| |
| Ethernet to WAN (V.35, RS530, RS449, X.21) bridge |
| |
 |
|
The ET100 Network Bridge is a high performance remote,self-learning, Ethernet bridge. Its compact size and low cost makes it ideal for cost-sensitive bridging applications, or as a LAN extender or segmenter over bit stream type infrastructures.
--------------------------------------------------------------------------------------
|
|
| |
|
| |
 |
|
The ET100/NRZ Network Bridge is a high performance,remote, self-learning Ethernet bridge. Its solid design makes it ideal for cost-sensitive bridging applications, or as a LAN extender or segmenter over NRZ bit stream type infrastructures.
--------------------------------------------------------------------------------------
|
|
| |
